Audio Signal Analysis

Tools to analyze audio signals.

These objects are designed to retrieve specific informations from an audio stream. Analysis are sent at audio rate, user can use them for controlling parameters of others objects.

Follower

class Follower(input, freq=20, mul=1, add=0)[source]

Envelope follower.

Output signal is the continuous mean amplitude of an input signal.

Parent

PyoObject

Args
input: PyoObject

Input signal to process.

freq: float or PyoObject, optional

Cutoff frequency of the filter in hertz. Default to 20.

Note

The out() method is bypassed. Follower’s signal can not be sent to audio outs.

>>> s = Server().boot()
>>> s.start()
>>> sf = SfPlayer(SNDS_PATH + "/transparent.aif", loop=True, mul=.4).out()
>>> fol = Follower(sf, freq=30)
>>> n = Noise(mul=fol).out(1)

Public Data Attributes:

input

PyoObject.

freq

float or PyoObject.

Inherited from PyoObject

mul

float or PyoObject.

add

float or PyoObject.

Public Methods:

__init__(input[, freq, mul, add])

setInput(x[, fadetime])

Replace the input attribute.

setFreq(x)

Replace the freq attribute.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObject

__init__(input[, freq, mul, add])

__add__(x)

__radd__(x)

__iadd__(x)

__sub__(x)

__rsub__(x)

__isub__(x)

__mul__(x)

__rmul__(x)

__imul__(x)

__truediv__(x)

__rtruediv__(x)

__itruediv__(x)

__div__(x)

__rdiv__(x)

__idiv__(x)

__pow__(x)

__rpow__(x)

__mod__(x)

__neg__()

__lt__(x)

Return self<value.

__le__(x)

Return self<=value.

__eq__(x)

Return self==value.

__ne__(x)

Return self!=value.

__gt__(x)

Return self>value.

__ge__(x)

Return self>=value.

__do_comp__(comp, mode[, default])

isPlaying([all])

Returns True if the object is currently playing, otherwise, returns False.

isOutputting([all])

Returns True if the object is outputting.

get([all])

Return the first sample of the current buffer as a float.

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

mix([voices])

Mix the object's audio streams into voices streams and return a Mix object.

range(min, max)

Adjust mul and add attributes according to a given range.

setMul(x)

Replace the mul attribute.

setAdd(x)

Replace the add attribute.

setSub(x)

Replace and inverse the add attribute.

setDiv(x)

Replace and inverse the mul attribute.

set(attr, value[, port, callback])

Replace any attribute with portamento.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObjectBase

__init__(input[, freq, mul, add])

dump()

Print infos about the current state of the object.

getBaseObjects()

Return a list of Stream objects managed by the instance.

getServer()

Return a reference to the current Server object.

getSamplingRate()

Return the current sampling rate (samples per second), as a float.

getBufferSize()

Return the current buffer size (samples per buffer), as an integer.

allowAutoStart([switch])

When autoStartChildren is activated in the Server, call this method with False as argument to stop the propagation of play/out/stop methods to and from this object.

useWaitTimeOnStop()

When autoStartChildren is activated in the Server, call this method to force an object given to the mul attribute of another object to use the wait time from the stop method instead of being stopped immediately.

addLinkedObject(x)

When autoStartChildren is activated in the Server, use this method to explicitly add an object in a dsp chain, which is generally controlled by the last object of the chain.

setStopDelay(x)

Set a specific waiting time when calling the stop method on this object.

getStopDelay()

Return the waiting time applied when calling the stop method on this object.

__iter__()

__next__()

next()

Alias for __next__ method.

__getitem__(i)

__setitem__(i, x)

__len__()

__repr__()

Return repr(self).

__dir__()

Default dir() implementation.

Private Data Attributes:

Inherited from PyoObject

_STREAM_TYPE

Inherited from PyoObjectBase

_STREAM_TYPE

Private Methods:

Inherited from PyoObject

_init_play()

_reset_from_set([attr])

Inherited from PyoObjectBase

_autoplay([dur, delay])

_autostop([wait])


setInput(x, fadetime=0.05)[source]

Replace the input attribute.

Args
x: PyoObject

New signal to process.

fadetime: float, optional

Crossfade time between old and new input. Default to 0.05.

setFreq(x)[source]

Replace the freq attribute.

Args
x: float or PyoObject

New freq attribute.

out(chnl=0, inc=1, dur=0, delay=0)[source]

Start processing and send samples to audio output beginning at chnl.

This method returns self, allowing it to be applied at the object creation.

Args
chnl: int, optional

Physical output assigned to the first audio stream of the object. Defaults to 0.

inc: int, optional

Output channel increment value. Defaults to 1.

dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

If chnl >= 0, successive streams increment the output number by inc and wrap around the global number of channels.

If chnl is negative, streams begin at 0, increment the output number by inc and wrap around the global number of channels. Then, the list of streams is scrambled.

If chnl is a list, successive values in the list will be assigned to successive streams.

ctrl(map_list=None, title=None, wxnoserver=False)[source]

Opens a sliders window to control the parameters of the object. SLMap has a dataOnly attribute to identify parameters that don’t audio signal as control but only discrete values.

If a list of values are given to a parameter, a multisliders will be used to control each stream independently.

Args
map_list: list of SLMap objects, optional

Users defined set of parameters scaling. There is default scaling for each object that accept ctrl method.

title: string, optional

Title of the window. If none is provided, the name of the class is used.

wxnoserver: boolean, optional

With wxPython graphical toolkit, if True, tells the interpreter that there will be no server window.

If wxnoserver is set to True, the interpreter will not wait for the server GUI before showing the controller window.

property input

PyoObject. Input signal to process.

property freq

float or PyoObject. Cutoff frequency of the filter.

Follower2

class Follower2(input, risetime=0.01, falltime=0.1, mul=1, add=0)[source]

Envelope follower with different attack and release times.

Output signal is the continuous mean amplitude of an input signal.

Parent

PyoObject

Args
input: PyoObject

Input signal to process.

risetime: float or PyoObject, optional

Time to reach upward value in seconds. Default to 0.01.

falltime: float or PyoObject, optional

Time to reach downward value in seconds. Default to 0.1.

Note

The out() method is bypassed. Follower’s signal can not be sent to audio outs.

See also

Follower, Balance, RMS, PeakAmp

>>> s = Server().boot()
>>> s.start()
>>> sf = SfPlayer(SNDS_PATH + "/transparent.aif", loop=True, mul=.4).out()
>>> fol2 = Follower2(sf, risetime=0.002, falltime=.1, mul=.5)
>>> n = Noise(fol2).out(1)

Public Data Attributes:

input

PyoObject.

risetime

float or PyoObject.

falltime

float or PyoObject.

Inherited from PyoObject

mul

float or PyoObject.

add

float or PyoObject.

Public Methods:

__init__(input[, risetime, falltime, mul, add])

setInput(x[, fadetime])

Replace the input attribute.

setRisetime(x)

Replace the risetime attribute.

setFalltime(x)

Replace the falltime attribute.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObject

__init__(input[, risetime, falltime, mul, add])

__add__(x)

__radd__(x)

__iadd__(x)

__sub__(x)

__rsub__(x)

__isub__(x)

__mul__(x)

__rmul__(x)

__imul__(x)

__truediv__(x)

__rtruediv__(x)

__itruediv__(x)

__div__(x)

__rdiv__(x)

__idiv__(x)

__pow__(x)

__rpow__(x)

__mod__(x)

__neg__()

__lt__(x)

Return self<value.

__le__(x)

Return self<=value.

__eq__(x)

Return self==value.

__ne__(x)

Return self!=value.

__gt__(x)

Return self>value.

__ge__(x)

Return self>=value.

__do_comp__(comp, mode[, default])

isPlaying([all])

Returns True if the object is currently playing, otherwise, returns False.

isOutputting([all])

Returns True if the object is outputting.

get([all])

Return the first sample of the current buffer as a float.

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

mix([voices])

Mix the object's audio streams into voices streams and return a Mix object.

range(min, max)

Adjust mul and add attributes according to a given range.

setMul(x)

Replace the mul attribute.

setAdd(x)

Replace the add attribute.

setSub(x)

Replace and inverse the add attribute.

setDiv(x)

Replace and inverse the mul attribute.

set(attr, value[, port, callback])

Replace any attribute with portamento.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObjectBase

__init__(input[, risetime, falltime, mul, add])

dump()

Print infos about the current state of the object.

getBaseObjects()

Return a list of Stream objects managed by the instance.

getServer()

Return a reference to the current Server object.

getSamplingRate()

Return the current sampling rate (samples per second), as a float.

getBufferSize()

Return the current buffer size (samples per buffer), as an integer.

allowAutoStart([switch])

When autoStartChildren is activated in the Server, call this method with False as argument to stop the propagation of play/out/stop methods to and from this object.

useWaitTimeOnStop()

When autoStartChildren is activated in the Server, call this method to force an object given to the mul attribute of another object to use the wait time from the stop method instead of being stopped immediately.

addLinkedObject(x)

When autoStartChildren is activated in the Server, use this method to explicitly add an object in a dsp chain, which is generally controlled by the last object of the chain.

setStopDelay(x)

Set a specific waiting time when calling the stop method on this object.

getStopDelay()

Return the waiting time applied when calling the stop method on this object.

__iter__()

__next__()

next()

Alias for __next__ method.

__getitem__(i)

__setitem__(i, x)

__len__()

__repr__()

Return repr(self).

__dir__()

Default dir() implementation.

Private Data Attributes:

Inherited from PyoObject

_STREAM_TYPE

Inherited from PyoObjectBase

_STREAM_TYPE

Private Methods:

Inherited from PyoObject

_init_play()

_reset_from_set([attr])

Inherited from PyoObjectBase

_autoplay([dur, delay])

_autostop([wait])


setInput(x, fadetime=0.05)[source]

Replace the input attribute.

Args
x: PyoObject

New signal to process.

fadetime: float, optional

Crossfade time between old and new input. Default to 0.05.

setRisetime(x)[source]

Replace the risetime attribute.

Args
x: float or PyoObject

New risetime attribute.

setFalltime(x)[source]

Replace the falltime attribute.

Args
x: float or PyoObject

New falltime attribute.

out(chnl=0, inc=1, dur=0, delay=0)[source]

Start processing and send samples to audio output beginning at chnl.

This method returns self, allowing it to be applied at the object creation.

Args
chnl: int, optional

Physical output assigned to the first audio stream of the object. Defaults to 0.

inc: int, optional

Output channel increment value. Defaults to 1.

dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

If chnl >= 0, successive streams increment the output number by inc and wrap around the global number of channels.

If chnl is negative, streams begin at 0, increment the output number by inc and wrap around the global number of channels. Then, the list of streams is scrambled.

If chnl is a list, successive values in the list will be assigned to successive streams.

ctrl(map_list=None, title=None, wxnoserver=False)[source]

Opens a sliders window to control the parameters of the object. SLMap has a dataOnly attribute to identify parameters that don’t audio signal as control but only discrete values.

If a list of values are given to a parameter, a multisliders will be used to control each stream independently.

Args
map_list: list of SLMap objects, optional

Users defined set of parameters scaling. There is default scaling for each object that accept ctrl method.

title: string, optional

Title of the window. If none is provided, the name of the class is used.

wxnoserver: boolean, optional

With wxPython graphical toolkit, if True, tells the interpreter that there will be no server window.

If wxnoserver is set to True, the interpreter will not wait for the server GUI before showing the controller window.

property input

PyoObject. Input signal to process.

property risetime

float or PyoObject. Time to reach upward value in seconds.

property falltime

float or PyoObject. Time to reach downward value in seconds.

ZCross

class ZCross(input, thresh=0.0, mul=1, add=0)[source]

Zero-crossing counter.

Output signal is the number of zero-crossing occured during each buffer size, normalized between 0 and 1.

Parent

PyoObject

Args
input: PyoObject

Input signal to process.

thresh: float, optional

Minimum amplitude difference allowed between adjacent samples to be included in the zeros count. Defaults to 0.

Note

The out() method is bypassed. ZCross’s signal can not be sent to audio outs.

>>> s = Server().boot()
>>> s.start()
>>> a = SfPlayer(SNDS_PATH + "/transparent.aif", loop=True, mul=.4).out()
>>> b = ZCross(a, thresh=.02)
>>> n = Noise(b).out(1)

Public Data Attributes:

input

PyoObject.

thresh

float.

Inherited from PyoObject

mul

float or PyoObject.

add

float or PyoObject.

Public Methods:

__init__(input[, thresh, mul, add])

setInput(x[, fadetime])

Replace the input attribute.

setThresh(x)

Replace the thresh attribute.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObject

__init__(input[, thresh, mul, add])

__add__(x)

__radd__(x)

__iadd__(x)

__sub__(x)

__rsub__(x)

__isub__(x)

__mul__(x)

__rmul__(x)

__imul__(x)

__truediv__(x)

__rtruediv__(x)

__itruediv__(x)

__div__(x)

__rdiv__(x)

__idiv__(x)

__pow__(x)

__rpow__(x)

__mod__(x)

__neg__()

__lt__(x)

Return self<value.

__le__(x)

Return self<=value.

__eq__(x)

Return self==value.

__ne__(x)

Return self!=value.

__gt__(x)

Return self>value.

__ge__(x)

Return self>=value.

__do_comp__(comp, mode[, default])

isPlaying([all])

Returns True if the object is currently playing, otherwise, returns False.

isOutputting([all])

Returns True if the object is outputting.

get([all])

Return the first sample of the current buffer as a float.

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

mix([voices])

Mix the object's audio streams into voices streams and return a Mix object.

range(min, max)

Adjust mul and add attributes according to a given range.

setMul(x)

Replace the mul attribute.

setAdd(x)

Replace the add attribute.

setSub(x)

Replace and inverse the add attribute.

setDiv(x)

Replace and inverse the mul attribute.

set(attr, value[, port, callback])

Replace any attribute with portamento.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObjectBase

__init__(input[, thresh, mul, add])

dump()

Print infos about the current state of the object.

getBaseObjects()

Return a list of Stream objects managed by the instance.

getServer()

Return a reference to the current Server object.

getSamplingRate()

Return the current sampling rate (samples per second), as a float.

getBufferSize()

Return the current buffer size (samples per buffer), as an integer.

allowAutoStart([switch])

When autoStartChildren is activated in the Server, call this method with False as argument to stop the propagation of play/out/stop methods to and from this object.

useWaitTimeOnStop()

When autoStartChildren is activated in the Server, call this method to force an object given to the mul attribute of another object to use the wait time from the stop method instead of being stopped immediately.

addLinkedObject(x)

When autoStartChildren is activated in the Server, use this method to explicitly add an object in a dsp chain, which is generally controlled by the last object of the chain.

setStopDelay(x)

Set a specific waiting time when calling the stop method on this object.

getStopDelay()

Return the waiting time applied when calling the stop method on this object.

__iter__()

__next__()

next()

Alias for __next__ method.

__getitem__(i)

__setitem__(i, x)

__len__()

__repr__()

Return repr(self).

__dir__()

Default dir() implementation.

Private Data Attributes:

Inherited from PyoObject

_STREAM_TYPE

Inherited from PyoObjectBase

_STREAM_TYPE

Private Methods:

Inherited from PyoObject

_init_play()

_reset_from_set([attr])

Inherited from PyoObjectBase

_autoplay([dur, delay])

_autostop([wait])


setInput(x, fadetime=0.05)[source]

Replace the input attribute.

Args
x: PyoObject

New signal to process.

fadetime: float, optional

Crossfade time between old and new input. Default to 0.05.

setThresh(x)[source]

Replace the thresh attribute.

Args
x: float

New amplitude difference threshold.

out(chnl=0, inc=1, dur=0, delay=0)[source]

Start processing and send samples to audio output beginning at chnl.

This method returns self, allowing it to be applied at the object creation.

Args
chnl: int, optional

Physical output assigned to the first audio stream of the object. Defaults to 0.

inc: int, optional

Output channel increment value. Defaults to 1.

dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

If chnl >= 0, successive streams increment the output number by inc and wrap around the global number of channels.

If chnl is negative, streams begin at 0, increment the output number by inc and wrap around the global number of channels. Then, the list of streams is scrambled.

If chnl is a list, successive values in the list will be assigned to successive streams.

ctrl(map_list=None, title=None, wxnoserver=False)[source]

Opens a sliders window to control the parameters of the object. SLMap has a dataOnly attribute to identify parameters that don’t audio signal as control but only discrete values.

If a list of values are given to a parameter, a multisliders will be used to control each stream independently.

Args
map_list: list of SLMap objects, optional

Users defined set of parameters scaling. There is default scaling for each object that accept ctrl method.

title: string, optional

Title of the window. If none is provided, the name of the class is used.

wxnoserver: boolean, optional

With wxPython graphical toolkit, if True, tells the interpreter that there will be no server window.

If wxnoserver is set to True, the interpreter will not wait for the server GUI before showing the controller window.

property input

PyoObject. Input signal to process.

property thresh

float. Amplitude difference threshold.

Yin

class Yin(input, tolerance=0.2, minfreq=40, maxfreq=1000, cutoff=1000, winsize=1024, mul=1, add=0)[source]

Pitch tracker using the Yin algorithm.

Pitch tracker using the Yin algorithm based on the implementation in C of aubio. This algorithm was developped by A. de Cheveigne and H. Kawahara and published in

de Cheveigne, A., Kawahara, H. (2002) ‘YIN, a fundamental frequency estimator for speech and music’, J. Acoust. Soc. Am. 111, 1917-1930.

The audio output of the object is the estimated frequency, in Hz, of the input sound.

Parent

PyoObject

Args
input: PyoObject

Input signal to process.

tolerance: float, optional

Parameter for minima selection, between 0 and 1. Defaults to 0.2.

minfreq: float, optional

Minimum estimated frequency in Hz. Frequency below this threshold will be ignored. Defaults to 40.

maxfreq: float, optional

Maximum estimated frequency in Hz. Frequency above this threshold will be ignored. Defaults to 1000.

cutoff: float, optional

Cutoff frequency, in Hz, of the lowpass filter applied on the input sound. Defaults to 1000.

The lowpass filter helps the algorithm to detect the fundamental frequency by filtering higher harmonics.

winsize: int, optional

Size, in samples, of the analysis window. Must be higher that two period of the lowest desired frequency.

Available at initialization time only. Defaults to 1024.

>>> s = Server(duplex=1).boot()
>>> s.start()
>>> lfo = Randh(min=100, max=500, freq=3)
>>> src = SineLoop(freq=lfo, feedback=0.1, mul=.3).out()
>>> pit = Yin(src, tolerance=0.2, winsize=1024)
>>> freq = Tone(pit, freq=10)
>>> # fifth above
>>> a = LFO(freq*1.5, type=2, mul=0.2).out(1)

Public Data Attributes:

input

PyoObject.

tolerance

float.

minfreq

float.

maxfreq

float.

cutoff

float.

Inherited from PyoObject

mul

float or PyoObject.

add

float or PyoObject.

Public Methods:

__init__(input[, tolerance, minfreq, ...])

setInput(x[, fadetime])

Replace the input attribute.

setTolerance(x)

Replace the tolerance attribute.

setMinfreq(x)

Replace the minfreq attribute.

setMaxfreq(x)

Replace the maxfreq attribute.

setCutoff(x)

Replace the cutoff attribute.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObject

__init__(input[, tolerance, minfreq, ...])

__add__(x)

__radd__(x)

__iadd__(x)

__sub__(x)

__rsub__(x)

__isub__(x)

__mul__(x)

__rmul__(x)

__imul__(x)

__truediv__(x)

__rtruediv__(x)

__itruediv__(x)

__div__(x)

__rdiv__(x)

__idiv__(x)

__pow__(x)

__rpow__(x)

__mod__(x)

__neg__()

__lt__(x)

Return self<value.

__le__(x)

Return self<=value.

__eq__(x)

Return self==value.

__ne__(x)

Return self!=value.

__gt__(x)

Return self>value.

__ge__(x)

Return self>=value.

__do_comp__(comp, mode[, default])

isPlaying([all])

Returns True if the object is currently playing, otherwise, returns False.

isOutputting([all])

Returns True if the object is outputting.

get([all])

Return the first sample of the current buffer as a float.

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

mix([voices])

Mix the object's audio streams into voices streams and return a Mix object.

range(min, max)

Adjust mul and add attributes according to a given range.

setMul(x)

Replace the mul attribute.

setAdd(x)

Replace the add attribute.

setSub(x)

Replace and inverse the add attribute.

setDiv(x)

Replace and inverse the mul attribute.

set(attr, value[, port, callback])

Replace any attribute with portamento.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObjectBase

__init__(input[, tolerance, minfreq, ...])

dump()

Print infos about the current state of the object.

getBaseObjects()

Return a list of Stream objects managed by the instance.

getServer()

Return a reference to the current Server object.

getSamplingRate()

Return the current sampling rate (samples per second), as a float.

getBufferSize()

Return the current buffer size (samples per buffer), as an integer.

allowAutoStart([switch])

When autoStartChildren is activated in the Server, call this method with False as argument to stop the propagation of play/out/stop methods to and from this object.

useWaitTimeOnStop()

When autoStartChildren is activated in the Server, call this method to force an object given to the mul attribute of another object to use the wait time from the stop method instead of being stopped immediately.

addLinkedObject(x)

When autoStartChildren is activated in the Server, use this method to explicitly add an object in a dsp chain, which is generally controlled by the last object of the chain.

setStopDelay(x)

Set a specific waiting time when calling the stop method on this object.

getStopDelay()

Return the waiting time applied when calling the stop method on this object.

__iter__()

__next__()

next()

Alias for __next__ method.

__getitem__(i)

__setitem__(i, x)

__len__()

__repr__()

Return repr(self).

__dir__()

Default dir() implementation.

Private Data Attributes:

Inherited from PyoObject

_STREAM_TYPE

Inherited from PyoObjectBase

_STREAM_TYPE

Private Methods:

Inherited from PyoObject

_init_play()

_reset_from_set([attr])

Inherited from PyoObjectBase

_autoplay([dur, delay])

_autostop([wait])


setInput(x, fadetime=0.05)[source]

Replace the input attribute.

Args
x: PyoObject

New signal to process.

fadetime: float, optional

Crossfade time between old and new input. Default to 0.05.

setTolerance(x)[source]

Replace the tolerance attribute.

Args
x: float

New parameter for minima selection, between 0 and 1.

setMinfreq(x)[source]

Replace the minfreq attribute.

Args
x: float

New minimum frequency detected.

setMaxfreq(x)[source]

Replace the maxfreq attribute.

Args
x: float

New maximum frequency detected.

setCutoff(x)[source]

Replace the cutoff attribute.

Args
x: float

New input lowpass filter cutoff frequency.

out(chnl=0, inc=1, dur=0, delay=0)[source]

Start processing and send samples to audio output beginning at chnl.

This method returns self, allowing it to be applied at the object creation.

Args
chnl: int, optional

Physical output assigned to the first audio stream of the object. Defaults to 0.

inc: int, optional

Output channel increment value. Defaults to 1.

dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

If chnl >= 0, successive streams increment the output number by inc and wrap around the global number of channels.

If chnl is negative, streams begin at 0, increment the output number by inc and wrap around the global number of channels. Then, the list of streams is scrambled.

If chnl is a list, successive values in the list will be assigned to successive streams.

ctrl(map_list=None, title=None, wxnoserver=False)[source]

Opens a sliders window to control the parameters of the object. SLMap has a dataOnly attribute to identify parameters that don’t audio signal as control but only discrete values.

If a list of values are given to a parameter, a multisliders will be used to control each stream independently.

Args
map_list: list of SLMap objects, optional

Users defined set of parameters scaling. There is default scaling for each object that accept ctrl method.

title: string, optional

Title of the window. If none is provided, the name of the class is used.

wxnoserver: boolean, optional

With wxPython graphical toolkit, if True, tells the interpreter that there will be no server window.

If wxnoserver is set to True, the interpreter will not wait for the server GUI before showing the controller window.

property input

PyoObject. Input signal to process.

property tolerance

float. Parameter for minima selection.

property minfreq

float. Minimum frequency detected.

property maxfreq

float. Maximum frequency detected.

property cutoff

float. Input lowpass filter cutoff frequency.

Centroid

class Centroid(input, size=1024, mul=1, add=0)[source]

Computes the spectral centroid of an input signal.

Output signal is the spectral centroid, in Hz, of the input signal. It indicates where the “center of mass” of the spectrum is. Perceptually, it has a robust connection with the impression of “brightness” of a sound.

Centroid does its computation with two overlaps, so a new output value comes every half of the FFT window size.

Parent

PyoObject

Args
input: PyoObject

Input signal to process.

size: int, optional

Size, as a power-of-two, of the FFT used to compute the centroid.

Available at initialization time only. Defaults to 1024.

Note

The out() method is bypassed. Centroid’s signal can not be sent to audio outs.

>>> s = Server().boot()
>>> s.start()
>>> a = SfPlayer(SNDS_PATH + "/transparent.aif", loop=True, mul=.4).out()
>>> b = Centroid(a, 1024)
>>> c = Port(b, 0.05, 0.05)
>>> d = ButBP(Noise(0.2), freq=c, q=5).out(1)

Public Data Attributes:

input

PyoObject.

Inherited from PyoObject

mul

float or PyoObject.

add

float or PyoObject.

Public Methods:

__init__(input[, size, mul, add])

setInput(x[, fadetime])

Replace the input attribute.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObject

__init__(input[, size, mul, add])

__add__(x)

__radd__(x)

__iadd__(x)

__sub__(x)

__rsub__(x)

__isub__(x)

__mul__(x)

__rmul__(x)

__imul__(x)

__truediv__(x)

__rtruediv__(x)

__itruediv__(x)

__div__(x)

__rdiv__(x)

__idiv__(x)

__pow__(x)

__rpow__(x)

__mod__(x)

__neg__()

__lt__(x)

Return self<value.

__le__(x)

Return self<=value.

__eq__(x)

Return self==value.

__ne__(x)

Return self!=value.

__gt__(x)

Return self>value.

__ge__(x)

Return self>=value.

__do_comp__(comp, mode[, default])

isPlaying([all])

Returns True if the object is currently playing, otherwise, returns False.

isOutputting([all])

Returns True if the object is outputting.

get([all])

Return the first sample of the current buffer as a float.

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

mix([voices])

Mix the object's audio streams into voices streams and return a Mix object.

range(min, max)

Adjust mul and add attributes according to a given range.

setMul(x)

Replace the mul attribute.

setAdd(x)

Replace the add attribute.

setSub(x)

Replace and inverse the add attribute.

setDiv(x)

Replace and inverse the mul attribute.

set(attr, value[, port, callback])

Replace any attribute with portamento.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObjectBase

__init__(input[, size, mul, add])

dump()

Print infos about the current state of the object.

getBaseObjects()

Return a list of Stream objects managed by the instance.

getServer()

Return a reference to the current Server object.

getSamplingRate()

Return the current sampling rate (samples per second), as a float.

getBufferSize()

Return the current buffer size (samples per buffer), as an integer.

allowAutoStart([switch])

When autoStartChildren is activated in the Server, call this method with False as argument to stop the propagation of play/out/stop methods to and from this object.

useWaitTimeOnStop()

When autoStartChildren is activated in the Server, call this method to force an object given to the mul attribute of another object to use the wait time from the stop method instead of being stopped immediately.

addLinkedObject(x)

When autoStartChildren is activated in the Server, use this method to explicitly add an object in a dsp chain, which is generally controlled by the last object of the chain.

setStopDelay(x)

Set a specific waiting time when calling the stop method on this object.

getStopDelay()

Return the waiting time applied when calling the stop method on this object.

__iter__()

__next__()

next()

Alias for __next__ method.

__getitem__(i)

__setitem__(i, x)

__len__()

__repr__()

Return repr(self).

__dir__()

Default dir() implementation.

Private Data Attributes:

Inherited from PyoObject

_STREAM_TYPE

Inherited from PyoObjectBase

_STREAM_TYPE

Private Methods:

Inherited from PyoObject

_init_play()

_reset_from_set([attr])

Inherited from PyoObjectBase

_autoplay([dur, delay])

_autostop([wait])


setInput(x, fadetime=0.05)[source]

Replace the input attribute.

Args
x: PyoObject

New signal to process.

fadetime: float, optional

Crossfade time between old and new input. Default to 0.05.

out(chnl=0, inc=1, dur=0, delay=0)[source]

Start processing and send samples to audio output beginning at chnl.

This method returns self, allowing it to be applied at the object creation.

Args
chnl: int, optional

Physical output assigned to the first audio stream of the object. Defaults to 0.

inc: int, optional

Output channel increment value. Defaults to 1.

dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

If chnl >= 0, successive streams increment the output number by inc and wrap around the global number of channels.

If chnl is negative, streams begin at 0, increment the output number by inc and wrap around the global number of channels. Then, the list of streams is scrambled.

If chnl is a list, successive values in the list will be assigned to successive streams.

ctrl(map_list=None, title=None, wxnoserver=False)[source]

Opens a sliders window to control the parameters of the object. SLMap has a dataOnly attribute to identify parameters that don’t audio signal as control but only discrete values.

If a list of values are given to a parameter, a multisliders will be used to control each stream independently.

Args
map_list: list of SLMap objects, optional

Users defined set of parameters scaling. There is default scaling for each object that accept ctrl method.

title: string, optional

Title of the window. If none is provided, the name of the class is used.

wxnoserver: boolean, optional

With wxPython graphical toolkit, if True, tells the interpreter that there will be no server window.

If wxnoserver is set to True, the interpreter will not wait for the server GUI before showing the controller window.

property input

PyoObject. Input signal to process.

AttackDetector

class AttackDetector(input, deltime=0.005, cutoff=10, maxthresh=3, minthresh=- 30, reltime=0.1, mul=1, add=0)[source]

Audio signal onset detection.

AttackDetector analyses an audio signal in input and output a trigger each time an onset is detected. An onset is a sharp amplitude rising while the signal had previously fall below a minimum threshold. Parameters must be carefully tuned depending on the nature of the analysed signal and the level of the background noise.

Parent

PyoObject

Args
input: PyoObject

Input signal to process.

deltime: float, optional

Delay time, in seconds, between previous and current rms analysis to compare. Defaults to 0.005.

cutoff: float, optional

Cutoff frequency, in Hz, of the amplitude follower’s lowpass filter. Defaults to 10.

Higher values are more responsive and also more likely to give false onsets.

maxthresh: float, optional

Attack threshold in positive dB (current rms must be higher than previous rms + maxthresh to be reported as an attack). Defaults to 3.0.

minthresh: float, optional

Minimum threshold in dB (signal must fall below this threshold to allow a new attack to be detected). Defaults to -30.0.

reltime: float, optional

Time, in seconds, to wait before reporting a new attack. Defaults to 0.1.

>>> s = Server(duplex=1).boot()
>>> s.start()
>>> a = Input()
>>> d = AttackDetector(a, deltime=0.005, cutoff=10, maxthresh=4, minthresh=-20, reltime=0.05)
>>> exc = TrigEnv(d, HannTable(), dur=0.005, mul=BrownNoise(0.3))
>>> wgs = Waveguide(exc, freq=[100,200.1,300.3,400.5], dur=30).out()

Public Data Attributes:

input

PyoObject.

deltime

float.

cutoff

float.

maxthresh

float.

minthresh

float.

reltime

float.

Inherited from PyoObject

mul

float or PyoObject.

add

float or PyoObject.

Public Methods:

__init__(input[, deltime, cutoff, ...])

setInput(x[, fadetime])

Replace the input attribute.

setDeltime(x)

Replace the deltime attribute.

setCutoff(x)

Replace the cutoff attribute.

setMaxthresh(x)

Replace the maxthresh attribute.

setMinthresh(x)

Replace the minthresh attribute.

setReltime(x)

Replace the reltime attribute.

readyToDetect()

Initializes variables in the ready state to detect an attack.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObject

__init__(input[, deltime, cutoff, ...])

__add__(x)

__radd__(x)

__iadd__(x)

__sub__(x)

__rsub__(x)

__isub__(x)

__mul__(x)

__rmul__(x)

__imul__(x)

__truediv__(x)

__rtruediv__(x)

__itruediv__(x)

__div__(x)

__rdiv__(x)

__idiv__(x)

__pow__(x)

__rpow__(x)

__mod__(x)

__neg__()

__lt__(x)

Return self<value.

__le__(x)

Return self<=value.

__eq__(x)

Return self==value.

__ne__(x)

Return self!=value.

__gt__(x)

Return self>value.

__ge__(x)

Return self>=value.

__do_comp__(comp, mode[, default])

isPlaying([all])

Returns True if the object is currently playing, otherwise, returns False.

isOutputting([all])

Returns True if the object is outputting.

get([all])

Return the first sample of the current buffer as a float.

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

mix([voices])

Mix the object's audio streams into voices streams and return a Mix object.

range(min, max)

Adjust mul and add attributes according to a given range.

setMul(x)

Replace the mul attribute.

setAdd(x)

Replace the add attribute.

setSub(x)

Replace and inverse the add attribute.

setDiv(x)

Replace and inverse the mul attribute.

set(attr, value[, port, callback])

Replace any attribute with portamento.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObjectBase

__init__(input[, deltime, cutoff, ...])

dump()

Print infos about the current state of the object.

getBaseObjects()

Return a list of Stream objects managed by the instance.

getServer()

Return a reference to the current Server object.

getSamplingRate()

Return the current sampling rate (samples per second), as a float.

getBufferSize()

Return the current buffer size (samples per buffer), as an integer.

allowAutoStart([switch])

When autoStartChildren is activated in the Server, call this method with False as argument to stop the propagation of play/out/stop methods to and from this object.

useWaitTimeOnStop()

When autoStartChildren is activated in the Server, call this method to force an object given to the mul attribute of another object to use the wait time from the stop method instead of being stopped immediately.

addLinkedObject(x)

When autoStartChildren is activated in the Server, use this method to explicitly add an object in a dsp chain, which is generally controlled by the last object of the chain.

setStopDelay(x)

Set a specific waiting time when calling the stop method on this object.

getStopDelay()

Return the waiting time applied when calling the stop method on this object.

__iter__()

__next__()

next()

Alias for __next__ method.

__getitem__(i)

__setitem__(i, x)

__len__()

__repr__()

Return repr(self).

__dir__()

Default dir() implementation.

Private Data Attributes:

Inherited from PyoObject

_STREAM_TYPE

Inherited from PyoObjectBase

_STREAM_TYPE

Private Methods:

Inherited from PyoObject

_init_play()

_reset_from_set([attr])

Inherited from PyoObjectBase

_autoplay([dur, delay])

_autostop([wait])


setInput(x, fadetime=0.05)[source]

Replace the input attribute.

Args
x: PyoObject

New signal to process.

fadetime: float, optional

Crossfade time between old and new input. Default to 0.05.

setDeltime(x)[source]

Replace the deltime attribute.

Args
x: float

New delay between rms analysis.

setCutoff(x)[source]

Replace the cutoff attribute.

Args
x: float

New cutoff for the follower lowpass filter.

setMaxthresh(x)[source]

Replace the maxthresh attribute.

Args
x: float

New attack threshold in dB.

setMinthresh(x)[source]

Replace the minthresh attribute.

Args
x: float

New minimum threshold in dB.

setReltime(x)[source]

Replace the reltime attribute.

Args
x: float

Time, in seconds, to wait before reporting a new attack.

readyToDetect()[source]

Initializes variables in the ready state to detect an attack.

out(chnl=0, inc=1, dur=0, delay=0)[source]

Start processing and send samples to audio output beginning at chnl.

This method returns self, allowing it to be applied at the object creation.

Args
chnl: int, optional

Physical output assigned to the first audio stream of the object. Defaults to 0.

inc: int, optional

Output channel increment value. Defaults to 1.

dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

If chnl >= 0, successive streams increment the output number by inc and wrap around the global number of channels.

If chnl is negative, streams begin at 0, increment the output number by inc and wrap around the global number of channels. Then, the list of streams is scrambled.

If chnl is a list, successive values in the list will be assigned to successive streams.

ctrl(map_list=None, title=None, wxnoserver=False)[source]

Opens a sliders window to control the parameters of the object. SLMap has a dataOnly attribute to identify parameters that don’t audio signal as control but only discrete values.

If a list of values are given to a parameter, a multisliders will be used to control each stream independently.

Args
map_list: list of SLMap objects, optional

Users defined set of parameters scaling. There is default scaling for each object that accept ctrl method.

title: string, optional

Title of the window. If none is provided, the name of the class is used.

wxnoserver: boolean, optional

With wxPython graphical toolkit, if True, tells the interpreter that there will be no server window.

If wxnoserver is set to True, the interpreter will not wait for the server GUI before showing the controller window.

property input

PyoObject. Input signal to process.

property deltime

float. Delay between rms analysis.

property cutoff

float. Cutoff for the follower lowpass filter.

property maxthresh

float. Attack threshold in dB.

property minthresh

float. Minimum threshold in dB.

property reltime

float. Time to wait before reporting a new attack.

Spectrum

class Spectrum(input, size=1024, wintype=2, function=None, wintitle='Spectrum')[source]

Spectrum analyzer and display.

Spectrum measures the magnitude of an input signal versus frequency within a user defined range. It can show both magnitude and frequency on linear or logarithmic scale.

Parent

PyoObject

Args
input: PyoObject

Input signal to process.

size: int {pow-of-two > 4}, optional

FFT size. Must be a power of two greater than 4. The FFT size is the number of samples used in each analysis frame. Defaults to 1024.

wintype: int, optional

Shape of the envelope used to filter each input frame. Possible shapes are :

  1. rectangular (no windowing)

  2. Hamming

  3. Hanning

  4. Bartlett (triangular)

  5. Blackman 3-term

  6. Blackman-Harris 4-term

  7. Blackman-Harris 7-term

  8. Tuckey (alpha = 0.66)

  9. Sine (half-sine window)

function: python callable, optional

If set, this function will be called with magnitudes (as list of lists, one list per channel). Useful if someone wants to save the analysis data into a text file. Defaults to None.

wintitle: string, optional

GUI window title. Defaults to “Spectrum”.

Note

Spectrum has no out method.

Spectrum has no mul and add attributes.

>>> s = Server().boot()
>>> s.start()
>>> a = SuperSaw(freq=[500,750], detune=0.6, bal=0.7, mul=0.5).out()
>>> spec = Spectrum(a, size=1024)

Public Data Attributes:

input

PyoObject.

size

int.

wintype

int.

gain

float.

lowbound

float.

highbound

float.

width

int.

height

int.

fscaling

boolean.

mscaling

boolean.

Inherited from PyoObject

mul

float or PyoObject.

add

float or PyoObject.

Public Methods:

__init__(input[, size, wintype, function, ...])

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

setInput(x[, fadetime])

Replace the input attribute.

setSize(x)

Replace the size attribute.

setWinType(x)

Replace the wintype attribute.

setFunction(function)

Sets the function to be called to retrieve the analysis data.

poll(active)

Turns on and off the analysis polling.

polltime(time)

Sets the polling time in seconds.

setLowFreq(x)

Sets the lower frequency, in Hz, returned by the analysis.

setHighFreq(x)

Sets the higher frequency, in Hz, returned by the analysis.

setLowbound(x)

Sets the lower frequency, as multiplier of sr, returned by the analysis.

setHighbound(x)

Sets the higher frequency, as multiplier of sr, returned by the analysis.

getLowfreq()

Returns the current lower frequency, in Hz, used by the analysis.

getHighfreq()

Returns the current higher frequency, in Hz, used by the analysis.

setWidth(x)

Sets the width, in pixels, of the current display.

setHeight(x)

Sets the height, in pixels, of the current display.

setFscaling(x)

Sets the frequency display to linear or logarithmic.

setMscaling(x)

Sets the magnitude display to linear or logarithmic.

getFscaling()

Returns the scaling of the frequency display.

getMscaling()

Returns the scaling of the magnitude display.

setGain(x)

Set the gain of the analysis data.

view([title, wxnoserver])

Opens a window showing the result of the analysis.

showChannelNames([visible])

If True (the default), channel names will be displayed in the window.

setChannelNames(names)

Change the stream names displayed in the spectrum window.

refreshView()

Updates the graphical display of the spectrum.

Inherited from PyoObject

__init__(input[, size, wintype, function, ...])

__add__(x)

__radd__(x)

__iadd__(x)

__sub__(x)

__rsub__(x)

__isub__(x)

__mul__(x)

__rmul__(x)

__imul__(x)

__truediv__(x)

__rtruediv__(x)

__itruediv__(x)

__div__(x)

__rdiv__(x)

__idiv__(x)

__pow__(x)

__rpow__(x)

__mod__(x)

__neg__()

__lt__(x)

Return self<value.

__le__(x)

Return self<=value.

__eq__(x)

Return self==value.

__ne__(x)

Return self!=value.

__gt__(x)

Return self>value.

__ge__(x)

Return self>=value.

__do_comp__(comp, mode[, default])

isPlaying([all])

Returns True if the object is currently playing, otherwise, returns False.

isOutputting([all])

Returns True if the object is outputting.

get([all])

Return the first sample of the current buffer as a float.

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

mix([voices])

Mix the object's audio streams into voices streams and return a Mix object.

range(min, max)

Adjust mul and add attributes according to a given range.

setMul(x)

Replace the mul attribute.

setAdd(x)

Replace the add attribute.

setSub(x)

Replace and inverse the add attribute.

setDiv(x)

Replace and inverse the mul attribute.

set(attr, value[, port, callback])

Replace any attribute with portamento.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObjectBase

__init__(input[, size, wintype, function, ...])

dump()

Print infos about the current state of the object.

getBaseObjects()

Return a list of Stream objects managed by the instance.

getServer()

Return a reference to the current Server object.

getSamplingRate()

Return the current sampling rate (samples per second), as a float.

getBufferSize()

Return the current buffer size (samples per buffer), as an integer.

allowAutoStart([switch])

When autoStartChildren is activated in the Server, call this method with False as argument to stop the propagation of play/out/stop methods to and from this object.

useWaitTimeOnStop()

When autoStartChildren is activated in the Server, call this method to force an object given to the mul attribute of another object to use the wait time from the stop method instead of being stopped immediately.

addLinkedObject(x)

When autoStartChildren is activated in the Server, use this method to explicitly add an object in a dsp chain, which is generally controlled by the last object of the chain.

setStopDelay(x)

Set a specific waiting time when calling the stop method on this object.

getStopDelay()

Return the waiting time applied when calling the stop method on this object.

__iter__()

__next__()

next()

Alias for __next__ method.

__getitem__(i)

__setitem__(i, x)

__len__()

__repr__()

Return repr(self).

__dir__()

Default dir() implementation.

Private Data Attributes:

Inherited from PyoObject

_STREAM_TYPE

Inherited from PyoObjectBase

_STREAM_TYPE

Private Methods:

_setViewFrame(frame)

Inherited from PyoObject

_init_play()

_reset_from_set([attr])

Inherited from PyoObjectBase

_autoplay([dur, delay])

_autostop([wait])


play(dur=0, delay=0)[source]

Start processing without sending samples to output. This method is called automatically at the object creation.

This method returns self, allowing it to be applied at the object creation.

Args
dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

out(chnl=0, inc=1, dur=0, delay=0)[source]

Start processing and send samples to audio output beginning at chnl.

This method returns self, allowing it to be applied at the object creation.

Args
chnl: int, optional

Physical output assigned to the first audio stream of the object. Defaults to 0.

inc: int, optional

Output channel increment value. Defaults to 1.

dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

If chnl >= 0, successive streams increment the output number by inc and wrap around the global number of channels.

If chnl is negative, streams begin at 0, increment the output number by inc and wrap around the global number of channels. Then, the list of streams is scrambled.

If chnl is a list, successive values in the list will be assigned to successive streams.

stop(wait=0)[source]

Stop processing.

This method returns self, allowing it to be applied at the object creation.

Args
wait: float, optional

Delay, in seconds, before the process is actually stopped. If autoStartChildren is activated in the Server, this value is propagated to the children objects. Defaults to 0.

Note

if the method setStopDelay(x) was called before calling stop(wait) with a positive wait value, the wait value won’t overwrite the value given to setStopDelay for the current object, but will be the one propagated to children objects. This allow to set a waiting time for a specific object with setStopDelay whithout changing the global delay time given to the stop method.

Fader and Adsr objects ignore waiting time given to the stop method because they already implement a delayed processing triggered by the stop call.

setInput(x, fadetime=0.05)[source]

Replace the input attribute.

Args
x: PyoObject

New signal to process.

fadetime: float, optional

Crossfade time between old and new input. Default to 0.05.

setSize(x)[source]

Replace the size attribute.

Args
x: int

new size attribute.

setWinType(x)[source]

Replace the wintype attribute.

Args
x: int

new wintype attribute.

setFunction(function)[source]

Sets the function to be called to retrieve the analysis data.

Args
function: python callable

The function called by the internal timer to retrieve the analysis data. The function must be created with one argument and will receive the data as a list of lists (one list per channel).

poll(active)[source]

Turns on and off the analysis polling.

Args
active: boolean

If True, starts the analysis polling, False to stop it. defaults to True.

polltime(time)[source]

Sets the polling time in seconds.

Args
time: float

Adjusts the frequency of the internal timer used to retrieve the current analysis frame. defaults to 0.05.

setLowFreq(x)[source]

Sets the lower frequency, in Hz, returned by the analysis.

Args
x: float

New low frequency in Hz. Adjusts the lowbound attribute, as x / sr.

setHighFreq(x)[source]

Sets the higher frequency, in Hz, returned by the analysis.

Args
x: float

New high frequency in Hz. Adjusts the highbound attribute, as x / sr.

setLowbound(x)[source]

Sets the lower frequency, as multiplier of sr, returned by the analysis.

Returns the real low frequency in Hz.

Args
x: float {0 <= x <= 0.5}

new lowbound attribute.

setHighbound(x)[source]

Sets the higher frequency, as multiplier of sr, returned by the analysis.

Returns the real high frequency in Hz.

Args
x: float {0 <= x <= 0.5}

new highbound attribute.

getLowfreq()[source]

Returns the current lower frequency, in Hz, used by the analysis.

getHighfreq()[source]

Returns the current higher frequency, in Hz, used by the analysis.

setWidth(x)[source]

Sets the width, in pixels, of the current display.

Used internally to build the list of points to draw.

Args
x: int

new width attribute.

setHeight(x)[source]

Sets the height, in pixels, of the current display.

Used internally to build the list of points to draw.

Args
x: int

new height attribute.

setFscaling(x)[source]

Sets the frequency display to linear or logarithmic.

Args
x: boolean

If True, the frequency display is logarithmic. False turns it back to linear. Defaults to False.

setMscaling(x)[source]

Sets the magnitude display to linear or logarithmic.

Args
x: boolean

If True, the magnitude display is logarithmic (which means in dB). False turns it back to linear. Defaults to True.

getFscaling()[source]

Returns the scaling of the frequency display.

Returns True for logarithmic or False for linear.

getMscaling()[source]

Returns the scaling of the magnitude display.

Returns True for logarithmic or False for linear.

setGain(x)[source]

Set the gain of the analysis data. For drawing purpose.

Args
x: float

new gain attribute, as linear values.

view(title='Spectrum', wxnoserver=False)[source]

Opens a window showing the result of the analysis.

Args
title: string, optional

Window title. Defaults to “Spectrum”.

wxnoserver: boolean, optional

With wxPython graphical toolkit, if True, tells the interpreter that there will be no server window.

If wxnoserver is set to True, the interpreter will not wait for the server GUI before showing the controller window.

showChannelNames(visible=True)[source]

If True (the default), channel names will be displayed in the window.

setChannelNames(names)[source]

Change the stream names displayed in the spectrum window.

If given a list of strings, these will be displayed as the name of the consecutive audio streams instead of the generic ‘chan X’ names.

refreshView()[source]

Updates the graphical display of the spectrum.

Called automatically by the internal timer.

property input

PyoObject. Input signal to process.

property size

int. FFT size.

property wintype

int. Windowing method.

property gain

float. Sets the gain of the analysis data.

property lowbound

float. Lowest frequency (multiplier of sr) to output.

property highbound

float. Highest frequency (multiplier of sr) to output.

property width

int. Width, in pixels, of the current display.

property height

int. Height, in pixels, of the current display.

property fscaling

boolean. Scaling of the frequency display.

property mscaling

boolean. Scaling of the magnitude display.

Scope

class Scope(input, length=0.05, gain=0.67, function=None, wintitle='Scope')[source]

Oscilloscope - audio waveform display.

Oscilloscopes are used to observe the change of an electrical signal over time.

Parent

PyoObject

Args
input: PyoObject

Input signal to process.

length: float, optional

Length, in seconds, of the displayed window. Can’t be a list. Defaults to 0.05.

gain: float, optional

Linear gain applied to the signal to be displayed. Can’t be a list. Defaults to 0.67.

function: python callable, optional

If set, this function will be called with samples (as list of lists, one list per channel). Useful if someone wants to save the analysis data into a text file. Defaults to None.

wintitle: string, optional

GUI window title. Defaults to “Scope”.

Note

Scope has no out method.

Scope has no mul and add attributes.

>>> s = Server().boot()
>>> s.start()
>>> a = Sine([100,100.2], mul=0.7)
>>> b = Noise(0.1)
>>> scope = Scope(a+b)

Public Data Attributes:

input

PyoObject.

length

float.

gain

float.

Inherited from PyoObject

mul

float or PyoObject.

add

float or PyoObject.

Public Methods:

__init__(input[, length, gain, function, ...])

setInput(x[, fadetime])

Replace the input attribute.

setLength(x)

Replace the length attribute.

setGain(x)

Set the gain boost applied to the analysed data.

poll(active)

Turns on and off the analysis polling.

setWidth(x)

Gives the width of the display to the analyzer.

setHeight(x)

Gives the height of the display to the analyzer.

view([title, wxnoserver])

Opens a window showing the incoming waveform.

setFunction(function)

Sets the function to be called to retrieve the analysis data.

showChannelNames([visible])

If True (the default), channel names will be displayed in the window.

setChannelNames(names)

Change the stream names displayed in the spectrum window.

refreshView()

Updates the graphical display of the scope.

Inherited from PyoObject

__init__(input[, length, gain, function, ...])

__add__(x)

__radd__(x)

__iadd__(x)

__sub__(x)

__rsub__(x)

__isub__(x)

__mul__(x)

__rmul__(x)

__imul__(x)

__truediv__(x)

__rtruediv__(x)

__itruediv__(x)

__div__(x)

__rdiv__(x)

__idiv__(x)

__pow__(x)

__rpow__(x)

__mod__(x)

__neg__()

__lt__(x)

Return self<value.

__le__(x)

Return self<=value.

__eq__(x)

Return self==value.

__ne__(x)

Return self!=value.

__gt__(x)

Return self>value.

__ge__(x)

Return self>=value.

__do_comp__(comp, mode[, default])

isPlaying([all])

Returns True if the object is currently playing, otherwise, returns False.

isOutputting([all])

Returns True if the object is outputting.

get([all])

Return the first sample of the current buffer as a float.

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

mix([voices])

Mix the object's audio streams into voices streams and return a Mix object.

range(min, max)

Adjust mul and add attributes according to a given range.

setMul(x)

Replace the mul attribute.

setAdd(x)

Replace the add attribute.

setSub(x)

Replace and inverse the add attribute.

setDiv(x)

Replace and inverse the mul attribute.

set(attr, value[, port, callback])

Replace any attribute with portamento.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObjectBase

__init__(input[, length, gain, function, ...])

dump()

Print infos about the current state of the object.

getBaseObjects()

Return a list of Stream objects managed by the instance.

getServer()

Return a reference to the current Server object.

getSamplingRate()

Return the current sampling rate (samples per second), as a float.

getBufferSize()

Return the current buffer size (samples per buffer), as an integer.

allowAutoStart([switch])

When autoStartChildren is activated in the Server, call this method with False as argument to stop the propagation of play/out/stop methods to and from this object.

useWaitTimeOnStop()

When autoStartChildren is activated in the Server, call this method to force an object given to the mul attribute of another object to use the wait time from the stop method instead of being stopped immediately.

addLinkedObject(x)

When autoStartChildren is activated in the Server, use this method to explicitly add an object in a dsp chain, which is generally controlled by the last object of the chain.

setStopDelay(x)

Set a specific waiting time when calling the stop method on this object.

getStopDelay()

Return the waiting time applied when calling the stop method on this object.

__iter__()

__next__()

next()

Alias for __next__ method.

__getitem__(i)

__setitem__(i, x)

__len__()

__repr__()

Return repr(self).

__dir__()

Default dir() implementation.

Private Data Attributes:

Inherited from PyoObject

_STREAM_TYPE

Inherited from PyoObjectBase

_STREAM_TYPE

Private Methods:

_setViewFrame(frame)

Inherited from PyoObject

_init_play()

_reset_from_set([attr])

Inherited from PyoObjectBase

_autoplay([dur, delay])

_autostop([wait])


setInput(x, fadetime=0.05)[source]

Replace the input attribute.

Args
x: PyoObject

New signal to process.

fadetime: float, optional

Crossfade time between old and new input. Default to 0.05.

setLength(x)[source]

Replace the length attribute.

Args
x: float

new length attribute.

setGain(x)[source]

Set the gain boost applied to the analysed data. For drawing purpose.

Args
x: float

new gain attribute, as linear values.

poll(active)[source]

Turns on and off the analysis polling.

Args
active: boolean

If True, starts the analysis polling, False to stop it. defaults to True.

setWidth(x)[source]

Gives the width of the display to the analyzer.

The analyzer needs this value to construct the list of points to draw on the display.

Args
x: int

Width of the display in pixel value. The default width is 500.

setHeight(x)[source]

Gives the height of the display to the analyzer.

The analyzer needs this value to construct the list of points to draw on the display.

Args
x: int

Height of the display in pixel value. The default height is 400.

view(title='Scope', wxnoserver=False)[source]

Opens a window showing the incoming waveform.

Args
title: string, optional

Window title. Defaults to “Scope”.

wxnoserver: boolean, optional

With wxPython graphical toolkit, if True, tells the interpreter that there will be no server window.

If wxnoserver is set to True, the interpreter will not wait for the server GUI before showing the controller window.

setFunction(function)[source]

Sets the function to be called to retrieve the analysis data.

Args
function: python callable

The function called by the internal timer to retrieve the analysis data. The function must be created with one argument and will receive the data as a list of lists (one list per channel).

showChannelNames(visible=True)[source]

If True (the default), channel names will be displayed in the window.

setChannelNames(names)[source]

Change the stream names displayed in the spectrum window.

If given a list of strings, these will be displayed as the name of the consecutive audio streams instead of the generic ‘chan X’ names.

refreshView()[source]

Updates the graphical display of the scope.

Called automatically by the internal timer.

property input

PyoObject. Input signal to process.

property length

float. Window length.

property gain

float. Sets the gain of the analysis data.

PeakAmp

class PeakAmp(input, function=None, mul=1, add=0)[source]

Peak amplitude follower.

Output signal is the continuous peak amplitude of an input signal. A new peaking value is computed every buffer size. If function argument is not None, it should be a function that will be called periodically with a variable-length argument list containing the peaking values of all object’s streams. Useful for meter drawing. Function definition must look like this:

>>> def getValues(*args):
...     print(args)
Parent

PyoObject

Args
input: PyoObject

Input signal to process.

function: callable, optional

Function that will be called with amplitude values in arguments. Default to None.

Note

The out() method is bypassed. PeakAmp’s signal can not be sent to audio outs.

>>> s = Server().boot()
>>> s.start()
>>> sf = SfPlayer(SNDS_PATH + "/transparent.aif", loop=True, mul=.4).out()
>>> amp = PeakAmp(sf)
>>> n = Noise(mul=Port(amp)).out(1)

Public Data Attributes:

input

PyoObject.

function

PyoObject.

Inherited from PyoObject

mul

float or PyoObject.

add

float or PyoObject.

Public Methods:

__init__(input[, function, mul, add])

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

setInput(x[, fadetime])

Replace the input attribute.

setFunction(x)

Replace the function attribute.

polltime(x)

Sets the delay, in seconds, between each call of the function.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObject

__init__(input[, function, mul, add])

__add__(x)

__radd__(x)

__iadd__(x)

__sub__(x)

__rsub__(x)

__isub__(x)

__mul__(x)

__rmul__(x)

__imul__(x)

__truediv__(x)

__rtruediv__(x)

__itruediv__(x)

__div__(x)

__rdiv__(x)

__idiv__(x)

__pow__(x)

__rpow__(x)

__mod__(x)

__neg__()

__lt__(x)

Return self<value.

__le__(x)

Return self<=value.

__eq__(x)

Return self==value.

__ne__(x)

Return self!=value.

__gt__(x)

Return self>value.

__ge__(x)

Return self>=value.

__do_comp__(comp, mode[, default])

isPlaying([all])

Returns True if the object is currently playing, otherwise, returns False.

isOutputting([all])

Returns True if the object is outputting.

get([all])

Return the first sample of the current buffer as a float.

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

mix([voices])

Mix the object's audio streams into voices streams and return a Mix object.

range(min, max)

Adjust mul and add attributes according to a given range.

setMul(x)

Replace the mul attribute.

setAdd(x)

Replace the add attribute.

setSub(x)

Replace and inverse the add attribute.

setDiv(x)

Replace and inverse the mul attribute.

set(attr, value[, port, callback])

Replace any attribute with portamento.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObjectBase

__init__(input[, function, mul, add])

dump()

Print infos about the current state of the object.

getBaseObjects()

Return a list of Stream objects managed by the instance.

getServer()

Return a reference to the current Server object.

getSamplingRate()

Return the current sampling rate (samples per second), as a float.

getBufferSize()

Return the current buffer size (samples per buffer), as an integer.

allowAutoStart([switch])

When autoStartChildren is activated in the Server, call this method with False as argument to stop the propagation of play/out/stop methods to and from this object.

useWaitTimeOnStop()

When autoStartChildren is activated in the Server, call this method to force an object given to the mul attribute of another object to use the wait time from the stop method instead of being stopped immediately.

addLinkedObject(x)

When autoStartChildren is activated in the Server, use this method to explicitly add an object in a dsp chain, which is generally controlled by the last object of the chain.

setStopDelay(x)

Set a specific waiting time when calling the stop method on this object.

getStopDelay()

Return the waiting time applied when calling the stop method on this object.

__iter__()

__next__()

next()

Alias for __next__ method.

__getitem__(i)

__setitem__(i, x)

__len__()

__repr__()

Return repr(self).

__dir__()

Default dir() implementation.

Private Data Attributes:

Inherited from PyoObject

_STREAM_TYPE

Inherited from PyoObjectBase

_STREAM_TYPE

Private Methods:

_buildList()

Inherited from PyoObject

_init_play()

_reset_from_set([attr])

Inherited from PyoObjectBase

_autoplay([dur, delay])

_autostop([wait])


play(dur=0, delay=0)[source]

Start processing without sending samples to output. This method is called automatically at the object creation.

This method returns self, allowing it to be applied at the object creation.

Args
dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

stop(wait=0)[source]

Stop processing.

This method returns self, allowing it to be applied at the object creation.

Args
wait: float, optional

Delay, in seconds, before the process is actually stopped. If autoStartChildren is activated in the Server, this value is propagated to the children objects. Defaults to 0.

Note

if the method setStopDelay(x) was called before calling stop(wait) with a positive wait value, the wait value won’t overwrite the value given to setStopDelay for the current object, but will be the one propagated to children objects. This allow to set a waiting time for a specific object with setStopDelay whithout changing the global delay time given to the stop method.

Fader and Adsr objects ignore waiting time given to the stop method because they already implement a delayed processing triggered by the stop call.

setInput(x, fadetime=0.05)[source]

Replace the input attribute.

Args
x: PyoObject

New signal to process.

fadetime: float, optional

Crossfade time between old and new input. Default to 0.05.

setFunction(x)[source]

Replace the function attribute.

Args
x: callable

New function to call with amplitude values in arguments.

polltime(x)[source]

Sets the delay, in seconds, between each call of the function.

Args
x: float

New polling time in seconds.

out(chnl=0, inc=1, dur=0, delay=0)[source]

Start processing and send samples to audio output beginning at chnl.

This method returns self, allowing it to be applied at the object creation.

Args
chnl: int, optional

Physical output assigned to the first audio stream of the object. Defaults to 0.

inc: int, optional

Output channel increment value. Defaults to 1.

dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

If chnl >= 0, successive streams increment the output number by inc and wrap around the global number of channels.

If chnl is negative, streams begin at 0, increment the output number by inc and wrap around the global number of channels. Then, the list of streams is scrambled.

If chnl is a list, successive values in the list will be assigned to successive streams.

ctrl(map_list=None, title=None, wxnoserver=False)[source]

Opens a sliders window to control the parameters of the object. SLMap has a dataOnly attribute to identify parameters that don’t audio signal as control but only discrete values.

If a list of values are given to a parameter, a multisliders will be used to control each stream independently.

Args
map_list: list of SLMap objects, optional

Users defined set of parameters scaling. There is default scaling for each object that accept ctrl method.

title: string, optional

Title of the window. If none is provided, the name of the class is used.

wxnoserver: boolean, optional

With wxPython graphical toolkit, if True, tells the interpreter that there will be no server window.

If wxnoserver is set to True, the interpreter will not wait for the server GUI before showing the controller window.

property input

PyoObject. Input signal to process.

property function

PyoObject. function signal to process.

RMS

class RMS(input, function=None, mul=1, add=0)[source]

Returns the RMS (Root-Mean-Square) value of a signal.

Output signal is the continuous rms of an input signal. A new rms value is computed every buffer size. If function argument is not None, it should be a function that will be called periodically with a variable-length argument list containing the rms values of all object’s streams. Useful for meter drawing. Function definition must look like this:

>>> def getValues(*args):
...     print(args)
Parent

PyoObject

Args
input: PyoObject

Input signal to process.

function: callable, optional

Function that will be called with amplitude values in arguments. Default to None.

Note

The out() method is bypassed. RMS’s signal can not be sent to audio outs.

>>> s = Server().boot()
>>> s.start()
>>> sf = SfPlayer(SNDS_PATH + "/transparent.aif", loop=True, mul=.4).out()
>>> amp = RMS(sf)
>>> n = Noise(mul=Port(amp)).out(1)

Public Data Attributes:

input

PyoObject.

function

PyoObject.

Inherited from PyoObject

mul

float or PyoObject.

add

float or PyoObject.

Public Methods:

__init__(input[, function, mul, add])

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

setInput(x[, fadetime])

Replace the input attribute.

setFunction(x)

Replace the function attribute.

polltime(x)

Sets the delay, in seconds, between each call of the function.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObject

__init__(input[, function, mul, add])

__add__(x)

__radd__(x)

__iadd__(x)

__sub__(x)

__rsub__(x)

__isub__(x)

__mul__(x)

__rmul__(x)

__imul__(x)

__truediv__(x)

__rtruediv__(x)

__itruediv__(x)

__div__(x)

__rdiv__(x)

__idiv__(x)

__pow__(x)

__rpow__(x)

__mod__(x)

__neg__()

__lt__(x)

Return self<value.

__le__(x)

Return self<=value.

__eq__(x)

Return self==value.

__ne__(x)

Return self!=value.

__gt__(x)

Return self>value.

__ge__(x)

Return self>=value.

__do_comp__(comp, mode[, default])

isPlaying([all])

Returns True if the object is currently playing, otherwise, returns False.

isOutputting([all])

Returns True if the object is outputting.

get([all])

Return the first sample of the current buffer as a float.

play([dur, delay])

Start processing without sending samples to output.

out([chnl, inc, dur, delay])

Start processing and send samples to audio output beginning at chnl.

stop([wait])

Stop processing.

mix([voices])

Mix the object's audio streams into voices streams and return a Mix object.

range(min, max)

Adjust mul and add attributes according to a given range.

setMul(x)

Replace the mul attribute.

setAdd(x)

Replace the add attribute.

setSub(x)

Replace and inverse the add attribute.

setDiv(x)

Replace and inverse the mul attribute.

set(attr, value[, port, callback])

Replace any attribute with portamento.

ctrl([map_list, title, wxnoserver])

Opens a sliders window to control the parameters of the object.

Inherited from PyoObjectBase

__init__(input[, function, mul, add])

dump()

Print infos about the current state of the object.

getBaseObjects()

Return a list of Stream objects managed by the instance.

getServer()

Return a reference to the current Server object.

getSamplingRate()

Return the current sampling rate (samples per second), as a float.

getBufferSize()

Return the current buffer size (samples per buffer), as an integer.

allowAutoStart([switch])

When autoStartChildren is activated in the Server, call this method with False as argument to stop the propagation of play/out/stop methods to and from this object.

useWaitTimeOnStop()

When autoStartChildren is activated in the Server, call this method to force an object given to the mul attribute of another object to use the wait time from the stop method instead of being stopped immediately.

addLinkedObject(x)

When autoStartChildren is activated in the Server, use this method to explicitly add an object in a dsp chain, which is generally controlled by the last object of the chain.

setStopDelay(x)

Set a specific waiting time when calling the stop method on this object.

getStopDelay()

Return the waiting time applied when calling the stop method on this object.

__iter__()

__next__()

next()

Alias for __next__ method.

__getitem__(i)

__setitem__(i, x)

__len__()

__repr__()

Return repr(self).

__dir__()

Default dir() implementation.

Private Data Attributes:

Inherited from PyoObject

_STREAM_TYPE

Inherited from PyoObjectBase

_STREAM_TYPE

Private Methods:

_buildList()

Inherited from PyoObject

_init_play()

_reset_from_set([attr])

Inherited from PyoObjectBase

_autoplay([dur, delay])

_autostop([wait])


play(dur=0, delay=0)[source]

Start processing without sending samples to output. This method is called automatically at the object creation.

This method returns self, allowing it to be applied at the object creation.

Args
dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

stop(wait=0)[source]

Stop processing.

This method returns self, allowing it to be applied at the object creation.

Args
wait: float, optional

Delay, in seconds, before the process is actually stopped. If autoStartChildren is activated in the Server, this value is propagated to the children objects. Defaults to 0.

Note

if the method setStopDelay(x) was called before calling stop(wait) with a positive wait value, the wait value won’t overwrite the value given to setStopDelay for the current object, but will be the one propagated to children objects. This allow to set a waiting time for a specific object with setStopDelay whithout changing the global delay time given to the stop method.

Fader and Adsr objects ignore waiting time given to the stop method because they already implement a delayed processing triggered by the stop call.

setInput(x, fadetime=0.05)[source]

Replace the input attribute.

Args
x: PyoObject

New signal to process.

fadetime: float, optional

Crossfade time between old and new input. Default to 0.05.

setFunction(x)[source]

Replace the function attribute.

Args
x: callable

New function to call with amplitude values in arguments.

polltime(x)[source]

Sets the delay, in seconds, between each call of the function.

Args
x: float

New polling time in seconds.

out(chnl=0, inc=1, dur=0, delay=0)[source]

Start processing and send samples to audio output beginning at chnl.

This method returns self, allowing it to be applied at the object creation.

Args
chnl: int, optional

Physical output assigned to the first audio stream of the object. Defaults to 0.

inc: int, optional

Output channel increment value. Defaults to 1.

dur: float, optional

Duration, in seconds, of the object’s activation. The default is 0 and means infinite duration.

delay: float, optional

Delay, in seconds, before the object’s activation. Defaults to 0.

If chnl >= 0, successive streams increment the output number by inc and wrap around the global number of channels.

If chnl is negative, streams begin at 0, increment the output number by inc and wrap around the global number of channels. Then, the list of streams is scrambled.

If chnl is a list, successive values in the list will be assigned to successive streams.

ctrl(map_list=None, title=None, wxnoserver=False)[source]

Opens a sliders window to control the parameters of the object. SLMap has a dataOnly attribute to identify parameters that don’t audio signal as control but only discrete values.

If a list of values are given to a parameter, a multisliders will be used to control each stream independently.

Args
map_list: list of SLMap objects, optional

Users defined set of parameters scaling. There is default scaling for each object that accept ctrl method.

title: string, optional

Title of the window. If none is provided, the name of the class is used.

wxnoserver: boolean, optional

With wxPython graphical toolkit, if True, tells the interpreter that there will be no server window.

If wxnoserver is set to True, the interpreter will not wait for the server GUI before showing the controller window.

property input

PyoObject. Input signal to process.

property function

PyoObject. function signal to process.